) of my lenses, and was never happy with the real life results. I spent a lot of time doing indoor testing (printed targets, computer monitor with moire patterns. Pre-printed targets do not need to be measured as FoCal will recognise the design and apply the correct dimension automatically.From my experience, for best results in focus MA, one really needs to have the environment as close to real life shooting as possible - meaning both correct light (use daylight, not fluorescent / LED / tungsten), and distances (if the typical use of the lens is full-height portraits, the size and the distance to the printed target should be chosen accordingly). Pre-printed or Hard Targets are available direct from Reikan in the online store as well as via our Reikan US distributor. Self-printed targets are the most popular option, if you prefer you can purchase a pre-printed FoCal Target instead. The target image files are also included within the FoCal software download. despite the user interface reflecting an incorrect estimate for target distance the calibration results are unchanged). Note, user entered target width information is only to estimate the target distance for presentation, it makes no difference to the calibration itself (i.e. In order to determine the Target Width users will need to measure the printed target (amount should be measured in “mm”) along the line as shown on the printed target. It’s possible to enter the target width within FoCal under Help > Settings > General Test Settings > Target Width. In those cases the estimate of target distance might be incorrect. If using a reflective print make sure the lighting is not reflected instead of the target design, stick to a matt paper is usually a safer option if not sure.ĭownload the target image file by clicking FoCal Target – 600dpi PNG in PNG format or a vector version that can be scaled without loss of quality in PDF format FoCal Target – PDF either option will work.Ī target printed to A4 or US letter size works well for most situations, if you’re calibrating wide angle lenses at far distances you can print the target a little larger (or scale the image so the target design fills to the edge of the paper). Key thing is that the target design has good contrast when viewed from the camera position. Usually we suggest to avoid using glossy or semi-gloss paper, it can work ok but glossy paper can end up with reflections from the lighting rather than showing the actual high contrast black and white design.

Once printed we suggest to mount the print on something stiff that won’t warp or deform over time (foam core or similar is good). We’ve tried a lot of different printing techniques and found for best results a standard inkjet printer set for high quality printing on matte heavyweight A4 or US letter sized paper works very well. The FoCal Target is an important part of how FoCal works, information for self-printing the target can be found below.

Reikan focal free download